Surely he couldn’t mean that he actually printed all the principal parts of a serious weather station setup, such as the wind vane, anemometer, or rain gauge? Except, on closer inspection ...

[Giovanni Aggiustatutto] creates a DIY weather station to measure rain fall ... A mostly 3D printed wind vane is printed with the base attached to a ball bearing and magnet so that the four ...

Take the vane outside or to a simulated windy weather area and watch it swing in the wind. Finally, use your compass to determine East, West, North and South, and then label the small triangles ...

The weather vane has served as a simple way of gauging wind direction for centuries. In the early years of its use before the advent of modern technologies, these instruments were vital as an ...

Read full article: ASK ANTHONY: Why is wind direction identified as where it is coming from? Did you know weather vanes have been keeping us in the know about wind direction for more than 2,000 years?

In addition to indicating wind direction and its religious significance ... is credited for designing the new weather vane. Similar to the original fixture, the rooster contains relics as well ...

Is the wind being affected by the buildings or the landscape around you? Click through this slideshow to learn about different parts of windy weather from weather vanes to wind in the Antarctic.

The self-emptying tipping bucket technology is most often used for rain gauges in weather stations ... Cup anemometer with separate wind vane - Uses three cups to measure wind speed, while ...